Welcome to Asceros
Telephone
+44(0) 0113 272 0606

Cold Drawn Precision Tubes

Cold Drawn Precision TubesCold Drawn Precision TubesCold Drawn Precision Tubes

• Cold Drawn Welded and Seamless Carbon and Alloy Precision Tubes

• Size Range O/D
– O/D 4.0 to 304.8mm

• Wall Thickness 0.40 to 40mm

• Special Shape tube section, Lemon, Triangular, Hexagonal, to international standards

• Supply Condition
– BK, BKW, BKS, GBK, NBK

• DOM Cold Drawn Welded Tubes, DIN2393 (EN10305-2, E235 (St37), E355 (St52)

• DIN 2391 (EN10305-1), Cold Drawn Seamless Tubes E235 (St35), E255 (St45), E355 (St52)

• Cold Drawn Seamless Hardening Tubes C35, C45, 25CrMo4, 34CrMo4, 42CrMo4

• Cold Drawn Seamless Tubes 17Cr3, 16MnCr5, 20MnV6

Smooth Bore Cylinder Tubes

Smooth Bore Cylinder TubesSmooth Bore Cylinder Tubes

Smooth Bore Tubes for Hydraulic Cylinders

Dom Welded Din 2393 ST52-3 BK
• Ready-To-Use Smooth Bore

I/D Roughness 0.2 - 0.8 my
• I/D Tolerance H9 / H10

Size Range: O/D X Wall
• O/D: 30mm - 125mm
• Wall: 3mm - 7.5mm

Tubes for Hydraulic Cylinders

Tubes for Hydraulic CylindersTubes for Hydraulic Cylinders

Cold Drawn Welded & Cold Drawn Seamless Tubes for Hydraulic Cylinders

• Honed or Skived

• Suitable for Skiving or Honing

• Proof-Tested Tube suitable for high pressure applications

Size Range: O/D X Wall
• O/D: 30mm - 275mm
• Wall: 3mm - 25.0mm

Tubes for Hydraulic & Pneumatic Lines

Tubes for Hydraulic and Pneumatic LinesTubes for Hydraulic and Pneumatic Lines

Cold Drawn HPL Tubes
BS3602, CFS 360 NBK, DIN 2391 ST 37.4 NBK, EN 10305-1, E235+N

• Self-Colour
• Phosphated
• Zinc Plated in yellow/blue/clear

Size Range: O/D X Wall
• O/D: 4.0mm - 219.1mm
• Wall: 0.4mm - 15.0mm

Hot Finished Seamless Tubes and Hollow Bars

Hot Finished TubesHot Finished Tubes
EN10297:2002 E355 S355 J2H
Hot Finished Seamless Tubes

• DIN 1629 Mechanical Properties
• Size Range : 10.2 / 660 O/D
• DIN 2448 Dimensional Tolerances
• Grade 490 - ST52.0
• Grade ST52-3N

BS6258 Grade 600
Hollow Bar for Machining

• ISO 2938 / BS 6258
• Size Range : 32 / 250 O/D
• Close Dimensional Tolerances
• Grade 600 (vanadium added)
• Grade 20MnV6

Welded Hollow Sections

Welded Hollow SectionsWelded Hollow SectionsWelded Hollow Sections
Cold Formed EN10219
Hot Finished EN10210
Cold Rolled EN10021

• S235, S275, S355
• Round O/D 20mm - 1219mm
• Square 20 x 20 - 300 x 300mm
• Rect 40 x 20 - 400 x 200mm
• Wall Thickness 2.0mm - 16mm
• Lengths 6, 7.5, 10 and 12 Metres
• Black, Self Colour, Pickled and Oiled, Galvanised
• Hexagon and Oval Shape Tubes

Typical Applications
• Automobile
• Furniture
• Fencing and Sidings
• Cattle Equipment
• Scaffolding
• Signposts
• Hand Tools
• Heavy Machinery
• Suitable for Galvanising

                                                       ALUMINIUM TUBES 

          Extruded Seamless / Drawn Seamless / Extruded Porthole / Drawn Porthole

Drawn and Extruded Aluminium TubesDrawn and Extruded Aluminium Tubes

Product
• Supplied in a wide range of tempers


Extruded Seamless Tubes from pierced solid billet are extruded using a circular die and piercing mandrel.  These can be used for applications involving high pressures and loads, or where tube is subjected to forming, bending or expansion.


Drawn Seamless Tubes are produced from Extruded Seamless Tubes which are drawn using dies and plugs to achieve the required shape for applications requiring high strength, close tolerances and improved bore surface finish.  There are no seams or joints in this product.

• Dia:           3.00 mm - 304.80 mm
• Thickness: 0.15 mm - 25.00 mm

Shapes
• Round, Square, Rectangular, Triangular, Hexagonal, Oval, and other special profiles.

Alloys
• 1050, 1100, 3003, 3103
• 5052, 5083, 5086, 5154, 5454
• 6005, 6060, 6061, 6063, 6082, 6351

Hot Rolled Bars

Hot Rolled BarsHot Rolled Bars
• Alloy Steels for Automotive and Locomotive Applications

• Carbon Re-Sulphurized Steels for Machining

• Bearing Steel for Racer Bearings

• Construct Steel, High Strength Low Alloy

• Round 10mm - 300mm

• Flat 15 x 5mm - 400 x 40mm

• Hexagon 12mm - 60mm

• Square 10mm - 60mm

Cold Worked Bars

Cold Worked BarsCold Worked BarsCold Worked Bars
Carbon Steels - Free Cutting Steels
Alloy Steels - Stainless Steels

• Peeled and Reeled Bars
– 9.5mm to 150mm dia

• Cold Drawn Round Bars
– 3.0mm to 80mm dia

• Cold Drawn Square and Hex
– 20mm to 80mm Sq/Hex

• Ground Bars / Tubes
– 3.0mm to 150mm dia

• Tolerances
– ISO h11 to ISO h6

• Reeling, Facing, Chamfering

• Eddy Current Surface Defect Inspection

Stainless Steel & Nickel Alloy Tubes

Stainless Steel & Nickel Alloy TubesStainless Steel & Nickel Alloy Tubes
Seamless & Welded
• Electro Welded
• Seamless O/D & I/D Redrawn
• Cold Drawn Welded
• In Coils, Straight Lengths 3-6 metres, fixed length

Size Range: O/D X Wall
• O/D: 0.3mm - 219.10mm
• Wall: 0.1mm - 12.7mm

Grades -ASTM/DIN Standards
• 304, 304L, 321, 316, 316L, 316SL, 316Ti
• Incoloy, Monel, Cupronickel

Condition
• Hard, Half Hard, Annealed

Cut lengths supplied

Machined Components

Machined Pins Machined Bush & Pins

• Asceros Intl can supply a wide range of machined components and fully turned parts from Carbon, Alloy Steel, Aluminium, Non Ferrous Metals, Castings + Plastics.

• Parts can be supplied unfinished, semi-finished or fully finished to include heat treatment and plating for provision of integrated manufacturing solutions.

• Our experience and knowledge enables us to produce and supply machined parts specific to the customers drawings, in conjunction to offering globally competitive prices using the latest CNC technologies and equipment.

Warehouse:
Asceros International Ltd
Leeds Container Base
Unit B2
Valley Farm Way
Stourton
Leeds LS10 1SE
England
Sales Office:
Asceros International Ltd
Leeds Container Base
Logistics House
PO Box 14
Valley Farm Way
Stourton
Leeds LS10 1SE
England
Tel:
Fax:
Email:
+44 (0) 0113 272 0606
+44 (0) 0113 272 0629
info@asceros.co.uk
+44 (0) 0113 272 0606
+44 (0) 0113 272 0629
sales@asceros.co.uk
Tel:
Fax:
Email: